Product description:
PR-601B Multi-Parameter Patient Monitor uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. It is used in many kind of wards of hospital, such as ICU, CHD room, neonate room, operation room and so on, in order to supply patient information in time. It is made up of mainframe, display, ECG leads wire, BP cuff, SPO2 sensor and temperature sensor. With 12.1 inch high-resolution display of ECG waveforms, respiratory waveform and blood oxygen pulse pressure volume diagram and the picture is more clearer.
Application:
Use for checking patient’s heart rate/pulse rate, NIBP (Systolic pressure, Diastolic pressure, average pressure), IBP(Systolic pressure, Diastolic pressure, average pressure),respiration,
ECG,temperature, SPO2 and other parameters.
Parameters:
1.12.1''TFT true color high definition LCD
2.Real-time display the waveform of ECG, SPO2, and RESP. At the same time, on the screen digital the data of PR, TEMP, RESP, ECG, SPO2, BP(SYS,DIA,MAP)etc
3.Blood pressure measurement has three modes: manual, cycle and fast measurement, and has adult/child/infant modes
4.Interface color of the waveform can be setup according to the requirement
5.With freezing and storage function
6.Automatically analyzing 20 kinds of arrhythmia waveform
7.Can playback 256 hours data trends of BP,PR,TEMP,SPO2,RESP when measuring
8.Inner recorder is optional, and it can record many waveforms and events
9.Three levels sound and light alarm, digital volume adjustment
10.Anti-defibrillation and anti-electrosurgical unit, and can be used simultaneously with the pacemaker
11.In-car electricity supply systems,AC-DC,inner lithium battery, work time of the battery is more than 2 hours
12.Etco2 and double IBP are optional
Operation:
a) Device can not be used in flammable mixture air environment or oxygen or anesthesia gas nitrous oxide mixture of flammable gas air.
b) Device must connect with power socket single, can not use the outlet with other equipment. Must use stabilized voltage supply if the power supply is not good.
c) Can not connect other electronic equipment with this device beyond this manual.
d) Monitor can not be put in shaking place.
e) Remain enough place for keeping aeration better.
f) Must assure normal working environment requirement of this device.
g) In order to assure safety working of device, must use all kind of changed parts, accessories and consumable(sensor, cable and electrode) supplied by Kernel company.
Photos:
VETERINARY PATIENT MONITOR
Features:
1. 12.1“true color TFT , and real-time display ECG waveforms,SPO2 and pulse volume chart,Respiration waveforms.
2. For small, medium and large animals;
3. Display ways are following: Standard interface,Big character interface and Screen display with multi-channel ECG
4. Can store over 256 hours data trends and 5 minutes ECGwaveformas
5. Can store 500 groups of blood pressure, heart rate, body temperature, SPO2, respiratory and other trend data
6. The inner printer can be optional, and it can record a variety of waveforms and events
7. Three levels sound and light alarm,digital volume adjustment
8. Anti-defibrillation and anti- electrosurgical unit
9. AC and DC power supply, built-in rechargeable battery, battery continual work time ≥ 120 minutes
Contact Person : | Terry Shi |
---|